Along with the 20 years of progress and development,Chengli becomes the biggest special truck manufacturer in Suizhou City, Hubei Province, China.
It covers an area of more than 500 acres,with 3 industrial parks, and over 100 professional truck workshops.
The group comprises over 10,000 individuals, encompassing engineers,workers, sales representatives, and service personnel.The maximum capital amount of RMB reaches 2 billion,and the target output value is 1.5 billion dollars in 2023.
This sprinkler is equipped with a Howo 6×4 chassis,
315/80R22.5 16PR tires, 293 HP, left-hand drive, maximum speed of 110km/h
Wheelbase(mm)4300+1350 Overall Dimension(mm)9435×2500×3060(length ×width×height )
Tank Capacity:20000 Liters
The appearance of Success cases of HOWO 6×4 20000 Liters Water Truck is more beautiful, the operation is convenient, the water quantity is large, the effect is high, and it is loved by many foreign customers.
When the sprinkler uses the river ditch and pond as the water source, pay attention to the end of the suction pipe is all submerged in the water. In order to avoid the inhalation of stones or more sediment, floating debris, the end of the suction pipe is generally equipped with a filtering device, suction is strictly prohibited to remove the filtering device. If the water source is shallow, you need to dig deeper at the suction beforehand to ensure that it does not contain debris and does not enter the air. Different sprinkler pumps on the water source requirements are different, clear water pumps require the water can not have impurities, turbid water pumps require the water can not have stones and too much sediment.
Centrifugal water pump each time before suction, must be added to the pump a certain amount of priming water, plus the water must be closed after adding the mouth. Self-priming pump * the first time you use, you need to add priming water, and then do not have to add priming water.
Suction water inlet pipe system must maintain a certain degree of vacuum, in order to draw water into the box. The inlet pipe system must be sealed reliably, the hose can not be broken, the hard pipe can not have cracks, otherwise it will produce air leakage phenomenon, which also causes the situation of sucking water.
Sprinkler either before suction, or before sprinkling, the pickup device hanging gear must be carried out at the time of parking.
Before winter comes, the water pump and the water pipe should be emptied to prevent freezing and cracking. Northern China generally severe winter is no longer construction, so after the end of construction, the water pump and water pipe immediately after the water drain, in order to prevent future problems.
Sprinkler front nozzle position is low, close to the ground, spray pressure is greater, can be used to wash the road surface; after the nozzle position is higher (sprinkler nozzle is generally installed on each side of the right and left one), sprinkler surface is wider, can be used for highway construction sprinkler, the use of nozzle after the nozzle, the front nozzle should be closed; the use of adjustable sprinkler nozzle sprinkler, sprinkler width can be adjusted according to the needs. The wider the sprinkling width, the less overlap in the middle, the more uniform the sprinkling density.
In the process of use should be regularly lubricated transmission assembly lubrication points, often tighten the joints to ensure normal use.
After a period of use, should regularly open the sewage pipe switch, the tank accumulated debris excluded, until the water becomes clear.
