SanHuan 4×2 6000 Liters Foam Fire Fighting Truck

SanHuan 4×2 6000 Liters Foam Fire Fighting Truck :

– Excellent fire extinguishing capability: Equipped with a CB10/40 low-pressure fire pump, with a flow rate of 40L/s and a pressure of 1.0MPa, and matched with a PL32 fire monitor. The water firing range is ≥ 50m, and the foam firing range is ≥ 45m. It can effectively spray foam and water over a long distance, quickly controlling the fire situation.

– Reasonable tank design: The water tank and foam tank are made of high-quality steel plates and undergo high-tech anti-corrosion treatment. The frame is welded, and longitudinal and transverse anti-sloshing plates are installed inside the tank to reduce the impact of the liquid on the tank during driving. The front and rear wall plates are folded with trapezoidal reinforcing ribs, which increases the strength and rigidity of the tank.

– Comfortable and safe cab: It adopts a cab design with a flat head, double-row seats, and four-opening doors. There are 3 people in the front row and 3 people in the back row. A guardrail and handrail are installed in front of the seats, which is convenient for firefighters to carry self-contained breathing apparatuses. In addition to the original vehicle equipment in the cab, equipment such as the power take-off control switch and siren are added; a long row of warning lights is installed at the front of the cab roof to enhance the warning effect of the vehicle during driving.

– Reasonable layout of the equipment box: The equipment box and the pump room are of an integral structure. The front part is the equipment box, and the rear part is the pump room, both of which are equipped with lockable rolling shutter doors. The equipment racks inside the equipment box are made of aluminum alloy profiles, and the space can be adjusted arbitrarily. There are drainage holes, and lighting lamps are equipped, which is convenient for accessing the equipment at night.