Chassis configuration:
Jiangling Kairui single-row forward-turning cab, equipped with JX4D30A5H JX4D30A5H engine, remote control central lock, six-speed transmission, air brake, 7.50R16 steel wire tire, air conditioning, steering assist, wheelbase 3815mm, ABS
Upload configuration:
The aerial work truck has a lifting height of 18 meters (including a person’s height of 1.7 meters), a hydraulic 360-degree full swing, three-section folding arms, and the folding arm series can be equipped with a 1 ton hook. Single hydraulic lifting cylinder, imported high-quality reversing balance valve, electric control operation lifting arm, 1 ton non-retractable hook mounted on the main boom, emergency power unit, safe and reliable, four hydraulic cylinders with adjustable outriggers With two-way hydraulic lock (outrigger operation is manual operation, can be controlled separately), outrigger and working arm are interlocked to prevent misoperation. Equipped with a working bucket (200kg), a small crane can be used as a small crane; the operation is flexible and convenient.
Information provided with the car:
Special value-added tax invoice, vehicle qualification certificate, vehicle tools, service manual, warranty manual.
Special function introduction of aerial work truck:
◆The aerial work truck of our company can be operated up and down, it can rotate 360 degrees in all directions, and it is equipped with a hand throttle.
◆ Equipped with 1T retractable hook, hooks above 18 meters cannot be retracted, and straight boom series aerial vehicles cannot be equipped with hooks.
◆Four H-shaped hydraulic outriggers are installed on the vehicle to ensure the stability and safety of the vehicle during operation. The top of the outriggers is equipped with flashing warning lights, which has a higher safety factor.
◆Adopt domestic and imported reversing valve and hydraulic cylinder, reversing balance, flexible and convenient operation, outrigger and working arm interlocked, outrigger and working arm interlocked to prevent misoperation.
◆Using three-section folding arms or multi-section straight arms, making aerial work vehicles more convenient. Two sets of control systems are installed on the vehicle, electric control and manual control, which can be operated up and down. There is a control device in the working bucket, which can control the lifting and rotating in the working bucket.
