Englishالعربيةবাংলা中文(简体)FrançaisDeutschItaliano日本語PortuguêsРусскийEspañolاردو

空中プラットフォームトラック

» 特別な目的のトラック » 空中プラットフォームトラック

JMCストレートアーム空中作業台車
  • JMC Straight arm aerial working platform truck from china
  • JMC Straight arm aerial working platform vehicle
  • china aerial working platform truck
  • JMC aerial working platform vehicle from china
  • JMC aerial working platform truck supplier
  • JMCストレートアーム空中作業台車

    1. 型番:CLW5080JGKJX

    2. GVW: 7800kg

    3. エンジン:150HP

    4. タイプ: Straight arm

    5. Lift height:18メートル (20メートル,24メートル,28メートル,...オプション)

    6. 名前: JMCストレートアーム空中作業台車

    問い合わせ
    • 仕様書
    • パラメーター
    • より多くの写真

    JMCストレートアーム空中作業台車

    JMCストレートアーム空中作業台車, 4 sections straight arm 18m aerial working truck. JMC aerial working platform truck supplier & メーカー…

    JMC Straight arm aerial working platform vehicle

    Main Parameters of JMC Straight arm aerial working platform truck

    JMC brand truck chassis, another japan technology truck in China, the same quality as ISUZU. これは 5080 series with engine power of 140 HP, euro III emission standard, 4 sections straight arm and the height it can reach to 18 メートル. Also you can choose 20m, 24メートル, 28メートル …the whole size of it is 7650x2160x3150mm, the wheelbase is 3850mm, GVM is 7800kg.

    JMC Straight arm aerial working platform truck from china

    Advantage of JMC Straight arm type aerial work vehicle

    1. The boom-type aerial work vehicles are limited by space constraints and can operate flexibly in tight high-rise buildings;
    2. The working height of the tandem aerial work vehicle is much higher than that of other types of aerial work vehicles, and the height adjustment is strong. Both the high floor and the low floor can be adjusted in the first time;
    3, a wide range of work, Yuntai plane rotation angle is large, can reach 240 degrees, upright work can reach 85 degrees;
    4, the rise speed, 26 meters full stretch only takes about 90 seconds, 36 meters full stretch takes about 100 seconds, and has a spare insurance chain, once the main insurance chain failure, spare insurance chain starts immediately, can completely guarantee the high-altitude operations safety;
    5, with a wireless remote control function, when handling goods, staff can operate remotely on the ground;
    6, ladder equipped with ferroalloy cast work basket, can carry about 400kg of weight, and the work basket can be placed around flat, increase the use of work basket area (about 3.6 平方メートル), the work basket is always level with the ground, so that the staff in When working at heights, it will not be unsuitable because of angle problems;
    7. The price of straight-arm aerial platforms is much lower than that of fire-fighting ladder trucks, but it can be used as a function of approaching fire ladders. It is a major step forward in the civilian use of fire ladder trucks.

    JMC aerial working platform truck supplier

    The boom-type aerial platforms are widely used in the installation, maintenance, and ascent operations of municipal, power, street lighting, advertising, communications, photography, gardens, airport ports and other industries. In addition, because it can be applied to a variety of rugged terrain in the wild, the boom-type aerial platforms are also widely used in bridge construction, ore terminals, and so on.

    JMC aerial working platform vehicle from china

    Easy-to-identify operator panels, multiple mechanical, electrical and hydraulic safety protections, advanced integrated hydraulics integrated system. These are the advantages of the straight arm lift platform. Coupled with its safety and stability, the boom-type lifting platform is used in many industries.

    china aerial working platform truck

    High-altitude trucks can greatly reduce the heavy physical labor, successfully complete a variety of job requirements under the high-altitude operation environment, and increase labor productivity and safety. With the advantages of wide operation range, large carrying capacity, and strong power, the arm-type ascending car is widely used in municipal power, construction, shipbuilding and other fields, especially in infrastructure construction.

    For more about the truch chassis or the detailed super structure of this JMC Straight arm aerial working platform truck, plsはメールでお問い合わせください: sales@cl-spv.comまたはwechat / whatsapp: 0086 18872992009 www.cl-spv.com

     

    Cheng Li Wei Brand CLW5084JGKJ5
    高高度運転車両の主な技術データ
    商品名: Cheng Li Wei Brand CLW5084JGKJ5 High altitude operating car 外寸 (んん): 7240× 2150× 3100
    シャーシモデル: JX1083 貨物箱サイズ (んん): ××
    総品質 (kg): 7605 近接 / 出発角度 (°) 20/13
    定格品質 (kg): フロントサスペンション / リアサスペンション (んん): 1155/1960
    準備の質 (kg): 7410 最大速度 (km / h): 100
    軸重: 2950/5260
    シャーシパラメータ
    シャーシモデル: JX1083 シャーシバッチ: 265
    軸番号: 2 燃料タイプ: ディーゼルオイル
    ホイールベース (んん): 3815 フロントホイールベース (んん): 1680
    定格乗客: 後部ホイールベース (んん): 1640
    タイヤ数: 6 ばねの数: 8/7+7, 9/9+8
    排出基準: gb17691 - 2005 ユーロⅤ, gb3847 - 2005
    タイヤ仕様: 7.50R16LT 14PR
    エンジンパラメーター
    エンジンモデル エンジン生産企業 変位 (ML) 力 (kw)
    JX4D30A5H ShareLtdによる江鈴汽車株式会社 2892 112
    その他の情報
    特別な機能の説明:
    The car is controlled by a hydraulic or electric system with multiple hydraulic cylinders, a vehicle capable of lifting up and down lifting operations; 保護材: Q235A炭素鋼, 接続モード: the right side and the rear lower protection are welded together, the rear section protection section size (んん): 120 * 50, the rear protection ground height (んん): 470, キャブを選択するためのシャーシ, AB S system type: VIE ABS-II, ABS system manufacturer: Shanghai Wan Jie Automotive Control System Co., 株式会社.

    中国JMCストレートアーム空中作業台車

    JMCストレートアーム空中作業台車 JMC telescopic boom aerial working platform truck JMC telescopic boom aerial platform truck JMC telescopic boom platform truck JMC aerial working platform truck JMC 20m aerial working platform truck JMC aerial platform truck working test JMC aerial platform truck working test offroad

    キーワード:
    空中プラットフォームトラック , , , , , , ,

    お問い合わせフォーム ( できるだけ早くご連絡いたします )

    名前:
    *
    Eメール:
    *
    電話:
    *
    メッセンジャー:
    *
    メッセージ:

    検証:
    0 + 5 = ?

    多分あなたも好き