» 市衛生トラック » ゴミ圧縮機

JAC 5000 リットルのコンパクターのごみ収集車
  • 5000 リットルのコンパクターのごみ収集車
  • China compactor garbage truck
  • compactor garbage truck supplier
  • china compactor garbage vehicle
  • chengli compactor garbage truck
  • intergrated control system on compactor garbage truck
  • rear view of compactor garbage truck
  • compactor garbage truck manufacturer
  • JAC 5000 リットルのコンパクターのごみ収集車

    1. 型番: CLW5070ZYSH3

    2. エンジン: 130 HP

    3. ホイールベース: 3360んん

    4. 容量: 5000 リットル

    5. Usage: ガベージコレクト, compactor and transport...

    • 仕様書

    JAC 5000 リットルのコンパクターのごみ収集車

    JAC 5000 liters compactor garbage truck directly from factorychengli special automobile co., 株式会社. 型番: CLW5070ZYSH3, JAC white cab with 130 馬力ディーゼルエンジン, 3360 mmホイールベース, 5000 liters garbage tank.

    5000 リットルのコンパクターのごみ収集車

    With an effective compression volume of 5 立方メートル, it can hold 3-4 tons of domestic garbage with a compression ratio of 3-4 times, and the compressed household waste density can be changed from 0.36 to 0.9. With the sewage collection box, the new flat box box is more beautiful and the tail is sealed. Rubber mat can prevent secondary pollution from dripping. The tail can be equipped with a reversing bucket or hanging bucket device. It can be equipped with a PLC key control system, dual control mechanisms in the cab and tail.

    China compactor garbage truck

    Jianghuai Kang Ling 5-way compact garbage truck chassis adopts 808 Jianghuai Kangling cab, Jianghuai HFC4DF1-2D2 engine 86 kW 117 馬力, LC5T400 transmission, 3 tons rear axle, エアブレーキ, 7.00R16 tire, ホイールベース: 3308んん, gas Braking, Rotation, Electrical Flameout, Warm Air, Electrical Preheat, Inductive Load Proportional Valve, Clutch Assist, ABS

    compactor garbage truck supplier

    Compressed garbage trucks with standard configuration: curved car body, 5-8 square box edge 4mm, bottom 4mm, 10-12 square box edge 4mm, bottom 5mm, 12 above edge 5mm, bottom 5mm, using domestic famous brand cylinder , High-density high-pressure tubing, multi-way valve and oil pump, with hanging bucket or small floor bucket flip, with PLC, optional hanging bucket turnover mechanism or bucket, optional metal paint.

    rear view of compactor garbage truck

    Compression garbage truck optional configuration: rear swing arm mechanism, with or without bucket; with a large floor bucket, side compression belt tie rod lift mechanism rear hydraulic door, with compression function, 等. or to inquire.

    chengli compactor garbage truck

    Compression Garbage Trucks This series of models can be equipped with a trash can hydraulic turnover mechanism, suitable for 120 リットル, 140 リットル, 240 liters of plastic trash and 350 liters of metal trash.

    china compactor garbage vehicle

    The garbage truck PLC control system according to the action requirements of garbage truck operation flow, after the garbage is poured into the pressure filling bucket, the scraper is opened, the pressure plate is pressed down, the scraper is scraped into, and the pressure plate is pulled. This cycle will be filled with garbage, which will be filled and removed. Proximity switches are used in the system to detect the position of each action and control the connection of actions.

    intergrated control system on compactor garbage truck

    For more about the chassis parameter or the details about this JAC compactor garbage truck (ガベージコレクト & compress truck), plsは私達に自由に連絡します. 0086-188 72992009 sales@cl-spv.com

    Also you can choose Dongfeng compactor garbage truck, howo compactor garbage truck, isuzu compactor garbage truck, foton compactor garbage truck, faw compactor garbage truck, jmc compactor garbage truck….


    ゴミ圧縮機 , , , , , ,

    お問い合わせフォーム ( できるだけ早くご連絡いたします )


    0 + 7 = ?