Englishالعربيةবাংলা中文(简体)FrançaisDeutschItalianoPortuguêsРусскийEspañolاردو

Camión de Saneamiento de la Ciudad

» Camión de Saneamiento de la Ciudad

Dongfeng jetting and suction truck
  • Dongfeng vacuum sewage suction truck
  • Dongfeng camión de succión al vacío
  • cleaning and suction truck factory
  • multifunctional cleaning and suction truck
  • Dongfeng cleaning and suction vehicle
  • Dongfeng Euro 6 limpieza y succión de camiones

    1. Engin: yuchai

    2. Emisión: Euro 6

    3. Horse Power: 165

    4. Distancia entre ejes: 3800mm

    5. Depósito de agua: 2.5cbm

    6. Sewage Tank: 7cbm

    investigación
    • Presupuesto

    Dongfeng Euro 6 limpieza y succión de camiones

    Dongfeng jetting and suction truck

    Los parámetros principales:

    This is newly issued dongfeng euro 6 series light truck chassis.
    Matching Yuchai 165-horsepower engine (Euro 6), Wanliyang 6-speed gearbox, 245 neumático de vacío, 3800 distancia entre ejes, multi-function steering wheel, with LED daytime running lights, electric windows and doors, mando a distancia, Freno de aire, ABS anti-lock Dead system, 7 cubic meters of pollution tank, 2.7 metros cúbicos de tanque de agua, Germany PF 215 high-pressure pump, 22 MPa, Shandong SK-12 water circulation vacuum pump, 60 meters high pressure pipe 19, 8 meters sewage suction pipe.

    Dongfeng cleaning and suction vehicle

    The cleaning and suction truck can not only transport sewage and sludge, but also play the role of dredging pipes. It has the advantages of self-priming and self-discharging, alta velocidad de trabajo, gran capacidad, y los medios de transportes.

    The working principle is to use powerful high-pressure water jet technology to clean in a high pressure and low flow rate, with strong decontamination and water saving. It can clean the old stains on the pipe wall and pavement to achieve a good flushing effect and play a sulfur pass The purpose of the sewer. The main function of the cleaning and suction dual-purpose vehicle is for sulfur flux in the blocked area of the sewer which workers cannot reach. It is widely used for sewage deposits, sulphur drainage of dead corner mud ditch, urban plastic, glass exterior wall washing, de succión de aguas residuales, sewage spraying in garden greening, high pressure washing of roads, etc..

    cuerpo del tanque: It is made of Q235 high-quality carbon steel plate produced by WISCO with a thickness of 6mm. El volumen del depósito es 7 metros cubicos, the sewage tank is 1.5 metros cubicos, and the clean water tank is 3.5 metros cubicos. The two tanks communicate with each other.
    Tail cover is opened hydraulically, tank lifts and unloads

    cleaning and suction truck factory
    Cleaning part: Imported Germany Pinfu 170 flow high-pressure pump, with a self-made filter at the front of the high-pressure pump, and a thick 8mm reel at the rear of the tank, with a 60-meter 19 # high-pressure pipe

    Suction section: SK-6 water circulation pump, con 2 suction pipes (with joints), the platform on both sides of the tank body is thickened and widened by 20 cm high barriers, the hydraulic top is installed, the tool box is as large
    Full, vehicle engineering.

     

     

     

    Palabras clave:
    Camión de Saneamiento de la Ciudad, Camión de succión , , ,

    Formulario de Consulta ( vamos a ayudarle a volver tan pronto como sea posible )

    Nombre:
    *
    Email:
    *
    Mensaje:

    Verificación:
    5 + 3 = ?

    Tal vez como también