Chassis configuration:
It adopts Dongfeng original chassis, Dongfeng Tianjin row semi-cab, Cummins 180 horsepower engine, 6-speed gearbox, 9.00R20 steel tires, 5000mm wheelbase, 4.5 front axle, 9 tons rear axle, original air conditioning, ABS.
Upload configuration:
The high-altitude operating vehicle has a lifting height of 24 meters (including a person’s height of 1.7 meters), a hydraulic 360-degree full swing, three-section folding arms, and the folding arm series can be equipped with a 1 ton hook. Single hydraulic lifting cylinder, imported high-quality reversing balance valve, electric control operation lifting arm, emergency power unit, safe and reliable, four hydraulic cylinders adjustable outrigger with two-way hydraulic lock (outrigger operation is manual operation, can be Separate control), the outrigger and the working arm are interlocked to prevent misoperation. Equipped with a working bucket (200kg), a small crane can be used as a small crane; the operation is flexible and convenient.
Information provided with the truck:
Special value-added tax invoice, vehicle qualification certificate, vehicle tools, service manual, warranty manual.
Special function introduction of aerial work truck:
◆The aerial work truck of our company can be operated up and down, it can rotate 360 degrees in all directions, and it is equipped with a hand throttle.
◆ Equipped with 1T retractable hook, hooks above 18 meters cannot be retracted, and straight boom series aerial vehicles cannot be equipped with hooks.
◆Four H-shaped hydraulic outriggers are installed on the vehicle to ensure the stability and safety of the vehicle during operation. The top of the outriggers is equipped with flashing warning lights, which has a higher safety factor.
◆Adopt domestic and imported reversing valve and hydraulic cylinder, reversing balance, flexible and convenient operation, outrigger and working arm interlocked, outrigger and working arm interlocked to prevent misoperation.
◆Using three-section folding arms or multi-section straight arms, making aerial work vehicles more convenient. Two sets of control systems are installed on the vehicle, electric control and manual control, which can be operated up and down. There is a control device in the working bucket, which can control the lifting and rotating in the working bucket.