Product Description
This newly crafted aluminum alloy fuel tank semi-trailer is built with advanced manufacturing technology. It features an effective tank volume of 48.3 cubic meters and is made from high-quality 5182 aluminum alloy plates, with 6mm thickness for the baffles, tank body, and end heads. The trailer is equipped with two European standard manholes and one aluminum alloy bottom valve with a voice alarm system. It adopts a through-compartment structure and comes with a complete bottom loading system, including vapor recovery, overfill prevention probe, and anti-static grounding reel.
The chassis is built with high-strength steel sub-beams and features three 10-ton FUWA axles with disc brakes, air suspension, an EBS system, a 28-ton single-side landing gear, and twelve 12R22.5 vacuum tires. With full configuration, elegant appearance, reduced curb weight, high safety, and reliable quality, this vehicle is designed for excellence in hazardous material transportation.
Product Specifications
| 50CBM Aluminum Alloy Fuel Tank Semi-Trailer Specifications |
| Category |
Item |
Specification |
| Basic Parameters |
Medium |
Gasoline |
| Loading/Unloading Method |
Bottom loading/unloading & top filling |
| Overall Dimensions (mm) |
12400 × 2500 × 3750 |
| Gross Vehicle Weight (kg) |
40,000 |
| Curb Weight (kg) |
6,200 |
| Rated Payload (kg) |
33,800 |
| Tank Body |
Actual Volume |
48.3 m³ (filled with water) |
| Cross-Section |
Elliptical type |
| Barrel Material |
5182 aluminum alloy, 6mm |
| End Heads |
5182 aluminum alloy, 6mm |
| Baffles |
5182 aluminum alloy, 6mm |
| Piping & Fittings |
Manholes |
2 × aluminum alloy European standard explosion-proof |
| Breather Valves |
4 × aluminum alloy |
| Bottom Loading Ports |
2 ports |
| Vapor Recovery |
Equipped |
| Overfill Protection |
Equipped |
| Emergency Shut-off Valves |
2 × 4″ aluminum alloy smart bottom valves |
| Discharge Valve Position |
Middle right side |
| Accessories |
Top Guardrail |
Sectional retractable with anti-slip walkway |
| Hose Storage Box |
2 × stainless steel (left and right sides) |
| Discharge Hose |
L = 6000 mm, 3″ steel wire hose |
| Ladders |
Internal & external tank ladders |
| Toolbox |
Aluminum alloy |
| Spare Tire Carrier |
1 piece |
| Fenders |
Modular aluminum alloy (factory-supplied) |
| Side Protection Rail |
Aluminum profile (factory-supplied) |
| Rear Bumper |
Aluminum profile (factory-supplied) |
| Fire Extinguishers |
2 × 8kg |
| Anti-Static Devices |
1 × grounding drag belt, 1 × grounding reel |
| Chassis Section |
Axles |
3 × 10T BPW axles with disc brakes |
| Suspension |
BPW air suspension |
| Tires |
12 × 12R22.5 |
| Rims |
12 × 9.0 aluminum alloy rims |
| Landing Gear |
28T single-side operation |
| King Pin |
50# bolt-on |
| Electrical System |
Voltage & Connector |
24V system, 7-pin socket |
| Lighting |
LED lights, rear with turn/brake/reverse/tail/fog lights |
| Wiring Protection |
Explosion-proof boxes, corrugated tubing |
| Anti-Corrosion |
Inner Surface Treatment |
Cleaned |
| Paint |
Natural aluminum finish |
| Markings & Labels |
Main Tank Marking |
Orange reflective tape on both sides and rear |
| Reflective Tape |
Red & white 3M reflective tape |
Innovative Design
The newly developed wave-breaking baffle structure adopts an innovative design with the tank body formed through one-time rolling and pressing. This not only enhances the strength of the baffles but also significantly extends the service life of the tank.
Product Display
